Showing posts with label Safety Tips while using Power Tools. Show all posts
Showing posts with label Safety Tips while using Power Tools. Show all posts

Friday, 30 August 2013

Top 10 Safety Tips for DIY at Home


Before you attempt your first DIY project at home, do take a look at these important safety tips:
  1.     Safety gear like goggles and other protective equipment are very important in DIY. Do not compromise on the quality of these, buy good ones and they will last you a long time.
  2.     Be careful around electrical sockets and long wires that are required for most power equipment.
  3.     Keep a first aid kit handy, to take care of any minor accidents without needing to run around looking for items.
  4.     The ladder can be a major cause of accidents during DIY, so make sure you use a stable one and that it is placed properly before you start off on your DIY activity.
    Source: http://bit.ly/15FwsuK
  5.     Do not wear loose clothing that might get in the way. Cotton clothes that are snug fitting are ideal. Overalls or other protective clothing may also be appropriate for metalworking and other such DIY activities.
  6.     Painting may require some additional precautions such as a breathing filter, and also keeping the room well aerated to minimize strong smells.
  7.     Pay attention to the working of the equipment, and ensure that you have taken all precautions and steps as mentioned in the manual.
  8.     Put off all power tools when not in use. Never place it down while put on, and walk away or get distracted.
  9.     Make sure the tools are cleaned and put away out of reach of children and pets. Not taking care of them will greatly lessen their life span.
  10.     Before completing your activity, make sure any debris and small items like nails and pins have been carefully removed or swept away. This is especially important if you have young children in the house.

Are there any more important tips that you can think of? Do leave a comment and tell us about it! Check out our Black & Decker power tools that can help facilitate your safe DIYing:

Friday, 13 July 2012

Safety 101



The safety of our customers is one our primary concerns at Black&Decker. Whether you’re an amateur or a professional, accidents do happen. Here are a couple of things you can do, that can prevent accidents:
  
1. Before you use any power tool for the first time, know what you’re getting into! Make sure you read the instruction manual.  It is important to understand exactly how to use your tools. Reading the manual will help you understand what the tool can be used for and what the best way to operate it is.  
    
2. Different tools may require different personal safety guards but, it is a must, to use eye goggles while using ANY power tool. This will stop any stray debris and dust from getting into your eyes. It is also advisable to wear full sleeved shirts and full length pants to make sure no debris can cut or scrape your skin.

3.  Inspect your equipment before you use it, make sure that there are no blunt blades or loose cables! While inspecting power tools make sure that the equipment is not connected to any power source. Never hold a power tool by its chord/cable, it could cause a loose connection inside the machine. 
  
4. If you are changing the blade or just cleaning your equipment, make sure that the power tool is disconnected from its power source. A slip of the finger could turn on the tool if it is still switched on at the power source. 
  
5. Never use any power tools if you are tired, if you have been consuming alcohol or even cough syrup! Any of these could impair your judgment and your control, control of yourself and the machine.One split second is all it takes to cause an accident. 

6.  Never leave an active power tool unattended under any circumstance. Once you are finished with your equipment make sure you disconnect it and keep it out of the reach of children and pets.
 
7. Keep your work area as clean as possible, excess clutter may get in your way and prevent you from using the tool efficiently and correctly. Also, make sure that there are no flammable substances nearby, because even a small spark from your power tool could set off a fire in no time.

8. Avoid wearing loose clothes and long dangly jewellery and if you have long hair make sure it’s always tied up! All of these can get caught in the equipment and pull you into it. If you are wearing gloves, make sure that they are fitted correctly so that there is no extra cloth which can get caught in the machinery.

9. Always use the right tools at the right time.Do not use a tool to do something other than what it was designed to do. The results could be disastrous. 
  
10. A lot of power tools today come with safety guards in place, as tempting as it may be, do NOT remove them! They are there for a reason! 

Well, there you have it, 10 safety measures that you should have no problem practicing. Simple as they are, implementing them can go a long way in keeping you safe.