Do It Yourself - The ideal Portable Summer Table

The summer breeze has been said to bring new friends; with that it brings more parties and trips to the beach. A portable table for these activities will always come in handy to keep food and drinks. This portable table can be rolled up into a nice bundle as you move from place to place. Go ahead and try this ten step method to build your own portable table.                                                                                                                                                                                                                                                                                                                                                                                                                                                                              

Things you’ll need:

· one 48 x 7/8 (inches) wooden solid cylindrical rod

· three 2 x 1/4 x 8 (inches) hardwood planks

· one 1 x 1/4 x 8(inches) hardwood plank

· four 1/4-20 x 1(inches) Carriage bolts                                                                     
· four 1/4-20 threaded insert nuts

· 4 x 1(inches) nylon web belt

· ¼ (inches) staples

· a Black & Decker Circular Saw (CS1500 184mm)                                                                                                                          

· a Black & Decker Hammer Drill (KR554RE 13mm)      

                                         

Here’s what you need to do:
1. Commence by cutting the rod into four equal length pieces.

2. Cut the two inch hardwood planks into 24 inch pieces. You will require ten pieces. Trim the whole stack at once to make sure they are all of equal length. You'll need two 24 inch pieces of the one inch hardwood plank too.

3. Scrub the ends of the rods and the planks with sandpaper.

4. Cut two 24 inch pieces of nylon web belt and burn the ends. This will protect it from fraying.

5. Arrange the planks side by side and make sure they are evenly spaced.

6. Staple the belt to the planks; make sure the staples are shorter than the thickness of the wood and staple. Use a strong stapler gun. Use a hammer for assistance.

7. Install all the planks making sure to move your spacers and keep the web belting pulled tight.
8. Place the one inch planks across the table top and drill ¼ inch holes in the corners. These one inch planks serve as spreaders to keep the nylon web belting tight. Widen the holes in the tabletop to receive the square head of the carriage bolts. After this, install the spreaders.

9. Now, for the legs, Mark one end of each rod in the centre and drill a 5/16 inch hole one inch deep into the end.

10. Install threaded inserts in the rods.





Finally, throw it together, screw the legs onto the carriage bolts and flip it over. You can now paint it or customize it as you wish. Enjoy your new portable table!

Connect with us: For more interesting DIY projects follow us on Facebook. Also, we’d love to hear from you; send us images and tell us about your DIY projects.